|
|
|
WSM
30 E
The Corrugated Tubing Cutter WSM30 E can cut unslitted corrugated tubing with an outside diameter of 7 to 32 mm, exactly at the corrugation peaks with a clean all around cut. The cutting edges will be free of burrs.
|
For the different diameter ranges, the guide nozzle must be replaced, but the nozzle change will take no more than 2 minutes. Parts of the supply are 6 sets of guide nozzles in the diameter specified by the customer.
At a pitch of 10 mm the cutter knife must be adapted to the peak and valley pitch of the corrugated tubing.
The corrugated tubing cutter WSM30 E is operated with the keyboard of |
 |
the control unit where the values for quantity and length of cuts are set. The speed is preset using a potentiometer at the operating panel.
If corrugated tubing with less than 7 mm diameter or larger than 32 mm is to be processed, or if other special applications are intended, please inquire on these.
|
|
Specification
Enlarge
picture
E-mail
|
|